Resultados de perforación exploratoria de alta ley en Teresita
ESTE ANUNCIO CONTIENE INFORMACIÓN PRIVILEGIADA ESTIPULADA BAJO LA VERSIÓN DEL REINO UNIDO DEL REGLAMENTO DE ABUSO DE MERCADO N ° 596/2014, QUE FORMA PARTE DEL DERECHO INGLÉS POR VIRTUD DE LA LEY EUROPEA (RETIRO) 2018, Y ENMENDADA. AL PUBLICAR ESTE ANUNCIO A TRAVÉS DE UN SERVICIO DE INFORMACIÓN REGLAMENTARIA, ESTA INFORMACIÓN SE CONSIDERA DE DOMINIO PÚBLICO.
13 de marzo de 2024
gran sur de cobre plc
("GSC" o la "Compañía")
10-15m Wide Vein Intersected at Teresita with Grades up to 2.03g/t Au and 1.31% Cu
Scout RC drilling programmes confirm IRGS and Breccia mineralisation targets
Great Southern Copper plc (LSE: GSCU), the company focused on copper-gold and lithium exploration in Chile, is pleased to announce that early results received for its scout RC drilling programmes at its Teresita and Abundante prospects confirm the high-grade Cu and Au target models.
Aspectos interesantes
· Intrusive related gold-copper system (IRGS) confirmed at Teresita with high-grade Au-Cu results intersected in quartz-sulphide veins up to 15m wide,
· Significant results for scout RC hole ESP23RC010 include;
§ 20m at 0.57g/t Au, 5.48g/t Ag and 0.43% Cu desde 35m, incluyendo
· 3m at 1.1 g/t Au, 8.71g/t Ag and 0.79% Cu from 39m and,
· 3m at 1.65g/t Au, 9.03g/t Ag and 0.69% Cu desde 48m
· High grade Au and Cu, up to 2.03g/t Au and 1.31% Cu hosted in quartz-sulphide veins
· Anómalo As-Bi-Co-Sb-Te assay grades consistent with the Au-Cu confirms IRGS style mineralisation and provides pathfinder geochemistry for follow-up exploration
· Results highlight significance of similar IRGS high-grade Cu+Au system at Victoria prospect
· Broad zones of anomalous copper from Abundante scout RC drilling confirms tourmaline breccia target including;
§ ESP23RC002: 17m at 0.52% Cu from 24m
· High grade copper up to 1.83% Cu was intersected in breccia which remains open at depth and to the west and south
· Planning for follow-up exploration to define prospect-scale drilling now in progress
· Assay results still pending for five drill holes at Teresita
Proximos pasos:
The Company will await the final results of the scout drilling before making definitive plans for follow-up exploration at Teresita and Abundante. Preliminary results have confirmed the IRGS model type for mineralisation at Teresita where high-grade gold and copper is hosted in quartz-sulphide veins that are over-printed near surface by late-stage carbonate veining. Individual veins within the broader Teresita system "pinch and swell". However, quartz-sulphide veins may become more coherent with depth below the surface carbonate alteration. Gold and copper grades vary throughout the system. Evidence of high-grade cores to the veins with broader lower-grade haloes is encouraging. Anomalous Ag-As-Bi-Sb-Co-Te pathfinder geochemistry is significant from an exploration perspective.
Follow-up exploration will focus on delineating the vein targets in more detail for Phase 2 prospect-scale drilling programmes. This work may include detailed soil geochemistry across the whole system and geophysics (magnetics, IP, EM).
Sam Garrett, director ejecutivo de Great Southern Copper, dijo: "These results have exceeded our expectations and, more importantly, confirm the target models that we have developed from our surface exploration work to date. Intersecting a 10-15m wide mineralised vein at shallow depths supporting grades over 2g/t Au and 1% Cu beneath a target outcrop 2m wide and assaying 0.6g/t Au is very encouraging.
"The Teresita scout RC results are very promising given the potential scale of the system mapped at surface, which to date demonstrates a cumulative strike length of over 5km.
"Given that the same style of IRGS mineralisation has been discovered at the Victoria prospect, these results are particularly exciting as they indicate that GSC's Especularita project hosts at least two of these large-scale, high-grade IRGS systems."
Drilling programme and sampling:
GSC has recently completed two scout RC drilling programmes at the Teresita and Abundante prospects comprising a total of 15 drill holes for 1,018 metres (Figure 1). Preliminary results have been received for holes ESP23RC001 to ESP23RC010. The programmes targeted surface mapping and rock chip geochemistry results and were designed to confirm the interpreted IRGS and breccia styles of mineralisation.
The RC drilling method employed at Especularita generates between 35 - 40kg of rock cuttings, or "chips", per metre. Representative samples for each metre of the cuttings are collected in large, individually numbered plastic bags, which are then weighed and transferred to a riffle splitter where they are separated (or split), and homogenised, three times into two duplicate samples of approximately 5kg each. GSC personnel then ticket and label one of the ±5kg samples using preprinted ticket books.
Finally, standard reference materials (SRM's or Standards), blanks, and duplicate samples are inserted into the sample sequence for the purpose of quality assurance / quality control (QAQC). The second ±5kg sample is used for geological description and stored for reference. An additional reference selection of cuttings for each metre is also retained in labelled boxes as a record of the geology of the drill hole.
At the completion of each hole the representative 5kg samples were transported as a batch from the field and delivered by Company employees to ALS Laboratories in Santago or La Serena where they are prepared for analysis (weighed, dried, crushed and pulverised). A subsequent 200g split of each sample pulp is then forwarded to the ALS geochemical laboratory in Lima, Peru, where samples are assayed for gold (30g fire assay with ICP-AES finish, ALS code AU-ICP21) and 48 major, base and trace elements by ICP-MS following a four-acid digest (ALS code ME-MS61).
RC drilling was selected for this initial proof-of-concept stage as it is faster and cheaper than diamond drilling and allows for the rapid testing of more targets for the same cost.
Teresita drilling:
At Teresita 534m of drilling was completed in nine RC scout drill holes (ESP23RC007 to ESP23RC015) to test for Au-Cu mineralisation in quartz-carbonate vein-breccias. The Teresita quartz-carbonate vein swarm has a cumulative strike length over 5km and rock chip samples returned grades up to 13.7g/t Au1 and 7.22% Cu2. Results have been received for holes RC007 to RC010.
Holes were drilled to test the continuity, thickness, and grade of quartz-carbonate vein-breccias below the surface outcrops, where they vary from less than a metre to several metres in width and from barren to mineralised. Holes ESP23RC007 and RC008 tested the Central Vein, hole RC009 the Grossa Vein, and RC010 the Gato Negro vein (Figure 1). All holes intersected the mineralised veins at depth with anomalous Au (>0.1g/t Au) and Cu (>0.1% Cu) grades.
Holes RC007 and 008 at the Central Vein indicate an anastomosing sheeted quartz vein zone with sporadic, weakly anomalous Au and Cu, separate to a barren carbonate-only zone. Hole RC009 at Grossa cut a weakly anomalous quartz-carbonate vein and a deeper barren granular quartz zone.
At Gato Negro, hole ESP23RC010 cut well mineralised chalcopyrite-pyrite-quartz-carbonate vein-breccia between 35-55m down-hole (Figure 2). Significant gold, silver, and copper intervals include;
· 20m with 0.57 ppm Au, 5.48 ppm Ag, 0.43% Cu from 35m, including:
o 7m with 0.68 ppm Au, 4.33 ppm Ag, 0.42% Cu from 35m including
§ 3m with 1.1 ppm Au, 8.71 ppm Ag, 0.79% Cu from 39m including
· 1m with 2.03 ppm Au, 15.65 ppm Ag, 1.31% Cu from 40m, and
o 9m with 0.73 ppm Au, 8.06 ppm Ag, 0.59% Cu from 46m, including
§ 3m with 1.65 ppm Au, 9.03 ppm Ag, 0.69% Cu from 48m.
Abundante drilling:
At Abundante 484m of drilling was completed in six RC drill holes (ESP23RC001 to RC006) to test beneath the historical copper mine where rock chip samples from mine walls returned values up to 3.39% Cu and 0.15g/t Au in tourmaline breccia3, 4. Analytical results have been received for all holes.
Holes ESP23RC001 to RC004 were drilled to test the continuity of the breccia (Figure 3). All holes intersected tourmaline-chlorite matrix breccia between 20 and 50m depth confirming lateral extension of the breccia. Anomalous copper mineralisation above 0.1% Cu is observed in all holes, with holes RC002 and RC004 returning significant copper values in the hanging wall of the "Abundante" fault before passing into unmineralised footwall. Significant assay results include;
ESP23RC002
§ 17m with 0.5212 % Cu, 0.017 ppm Au, 1.11 ppm Ag from 24m, including
§ 2m with 1.1225 % Cu, 0.015 ppm Au, 1.775 ppm Ag from 30m
ESP23RC004
§ 21m with 0.3045 % Cu, 0.012 ppm Au, 0.93 ppm Ag from 19m, including
§ 1m with 1.825 % Cu, 0.097 ppm Au, 1.42 ppm Ag from 38m
Holes ESP23RC005 and ESP23RC006 were drilled to the North and East to test for further extensions. Although breccia is locally observed in drill cuttings, it is not mineralised.
Copper mineralisation at Abundante remains open to depth as well as to the south and west. The potential for mineralisation at depth on the footwall side of the Abundante fault is also considered.
Figura 1: Collar location map for scout RC drillholes at Teresita and Abundante with rock chip gold assays, Especularita.
Figura 2: Cross-section for scout RC hole ESP23RC010 targeting Gato Negro vein, Teresita.
Referencias:
1. RNS 5675F (11 July 2023): High grade Cu-Au in rock chip samples from Teresita.
2. RNS 2146H (22 Nov 2022): Early exploration at Especularita identifies multiple copper targets and completion of drilling at San Lorenzo.
3. RNS 2962G (18 July 2023): Samples up to 3.39% Cu from Abundante Prospect.
4. RNS 6990V (05 December 2023): Scout RC drilling due to commence at Especularita.
Consultas:
gran sur de cobre plc | |
Sam Garrett, director ejecutivo | +44 0 20 4582 3500 |
SI Capital Limited | |
nick emerson | +44 (0) 1483 413500 |
Grupo Gracechurch | |
Harry Chathli, Alexis Gore, Henry Gamble | +44 0 20 4582 3500 |
Notas para los editores:
Acerca de Great Southern Copper
Great Southern Copper PLC es una empresa de exploración mineral que cotiza en el Reino Unido y se centra en el descubrimiento de depósitos de cobre, oro y litio en Chile. La Compañía tiene la opción de adquirir derechos sobre el 100% de dos proyectos en la zona costera poco explorada de Chile que son prospectivos para depósitos de cobre y oro a gran escala. Además, la Compañía tiene la opción de adquirir derechos sobre el 100% de un proyecto de litio ubicado en el distrito Salar de Atacama de Chile. Chile es una jurisdicción minera de importancia mundial, siendo el mayor productor de cobre del mundo y el segundo mayor productor de litio.
Los dos proyectos Cu-Au en etapa inicial comprenden los Proyectos San Lorenzo y Especularita, ambos ubicados en el cinturón metalogénico costero de Chile, que alberga importantes minas y depósitos de cobre, incluida la mina de cobre Carmen de Andacollo de Teck, y cuenta con un excelente acceso a infraestructura como como carreteras, energía y puertos. En ambas áreas de proyectos de exploración son evidentes importantes trabajos históricos de pequeña escala y artesanales tanto para el cobre como para el oro.
El proyecto Monti Lithium de la Compañía está ubicado estratégicamente en la región preandina del Salar de Atacama, que es la principal región productora de litio de Chile con infraestructura y operaciones mineras de litio bien establecidas.
Great Southern Copper está estratégicamente posicionada para respaldar el mercado global de cobre y litio, ambos metales críticos para baterías en la transición a la energía limpia en todo el mundo. La Compañía participa activamente en programas de trabajo de exploración y evaluación dirigidos tanto a depósitos de Cu-Au y Li de gran tonelaje y leyes bajas a medias como a depósitos de Cu-Au de alta ley.
Más información sobre la Compañía está disponible en el sitio web de la Compañía: https://gscplc.com
Declaración de persona competente
La información contenida en este anuncio relacionada con los resultados de la exploración se basa y representa fielmente la información revisada o compilada por el Sr. Sam Garrett, una persona competente que es miembro del Instituto Australiano de Geocientíficos y miembro de la Sociedad de Geólogos Económicos. Garrett es el director ejecutivo y accionista de Great Southern Copper PLC. El Sr. Garrett tiene experiencia suficiente que es relevante para los estilos de mineralización y tipos de depósito bajo consideración y para la actividad que se lleva a cabo para calificar como una Persona Competente tal como se define en la Edición de 2012 del "Código de Australasia para la presentación de informes de resultados de exploración, recursos minerales". y reservas de mineral". El Sr. Garrett ha proporcionado su consentimiento previo por escrito para la inclusión en este anuncio de los asuntos basados en información en la forma y contexto en el que aparece.
Este anuncio incluye información relacionada con los Resultados de Exploración preparados y divulgados por primera vez según el Código JORC (2012) y extraídos de los anuncios anteriores de la LSE de la Compañía como se indica, y el Prospecto de la Compañía con fecha del 20 de diciembre de 2021. Copias de estos anuncios están disponibles en Anuncios de la LSE página del sitio web de la Compañía: www.gscplc.com.
La Sociedad confirma que no tiene conocimiento de ninguna nueva información o dato que afecte materialmente a la información incluida en el Folleto de fecha 20 de diciembre de 2021.
Declaraciones prospectivas y de advertencia
Algunas declaraciones en este anuncio con respecto a estimaciones o eventos futuros son declaraciones prospectivas. Incluyen indicaciones y orientación sobre ganancias futuras, flujo de efectivo, costos y desempeño financiero. Las declaraciones a futuro incluyen, entre otras, declaraciones precedidas por palabras como "planificado", "esperado", "proyectado", "estimado", "podría", "programado", "pretende", "anticipa", "cree", "potencial", "predice", "prevé", "propone", "objetivo", "objetivo", "oportunidad", "podría", "nominal", "conceptual" y expresiones similares. Las declaraciones, opiniones y estimaciones a futuro incluidas en este informe se basan en suposiciones y contingencias que están sujetas a cambios sin previo aviso, al igual que las declaraciones sobre las tendencias del mercado y la industria, que se basan en interpretaciones de las condiciones actuales del mercado. Las declaraciones prospectivas se proporcionan únicamente como guía general y no deben considerarse como garantía de desempeño futuro. Las declaraciones prospectivas pueden verse afectadas por una variedad de variables que podrían causar que los resultados reales difieran de los resultados estimados o anticipados y pueden causar que el desempeño real y los resultados financieros de la Compañía en períodos futuros difieran materialmente de cualquier proyección de desempeño o resultados futuros expresados o implícitas en dichas declaraciones prospectivas. Por lo tanto, no se puede garantizar que los resultados reales no difieran materialmente de estas declaraciones prospectivas.
RNS puede usar su dirección IP para confirmar el cumplimiento de los términos y condiciones, para analizar cómo interactúa con la información contenida en esta comunicación y para compartir dicho análisis de forma anónima con otros como parte de nuestros servicios comerciales. Para obtener más información sobre cómo RNS y la Bolsa de Valores de Londres utilizan los datos personales que nos proporciona, consulte nuestra Política de privacidad.